Sam Turbo
Sam Turbo
AR SERIES -
SLURRY PUMPS SINGLE CASING.
Operating range:
- Capacity : Upto 2800m3/hr
- Head : Upto 70m
- Temp : Upto 110*c
- Pressure : Upto 40 bar
- Pump size :DN 50 mm to 350 mm
Application:
- Liquid of abrasive and coarse grained solids
- Lime mid slurry , Milk of lime, liquor upto 50% solids
- Sand water mixtures
Design Features:
- Twin casing / single casing design
- Outer casing in CI / carbon steel
- Heavy duty and single stage
- Inner casing in NI-Hard/HI-Chrome to take entire wear the armored centrifugal pump is designed to suit various slurry applications.
ZM SERIES -
DOUBLE SUCTION SPLIT CASE PUMP
Operating Range:
- Capacity: UPTO 4000 M3/hr
- Head: Upto 140M
- Temperature: Upto 200*C
- Pressure: Upto 40 bar.
- Pump Size: DN 50mm to 700 mm
Application:
- FAN PUMP, STOCK FEED,
- STOCK CIRCULATION
- CENTRI-CLEANER APPLICATION IN PULP & PAPER MILLS
- STROM WATER
- INDUSTRIES TRANSFER WORKS
Design Features:
- SPLIT CASE, SINGLE STAGE
- DOUBLE SUCTION , RADIAL STAGGERED VANE IMPELLER
- HIGH RELIABLITY
- REVERSE ROTAION AVAILABLE.
- VIBRATION FREE PERFORMANCE.
- GLAND PACKING
- MECHNICAL SEAL
- REVERSE ROTATION AVAILABLE
TU SERIES -
SPLIT CASE 2 STAGES
Operating Range:
- Delivery Sixe: 80mm to 200mm
- Capacity: up to 600 m³/hr
- Head: Upto 125m
- Temperature: upto 125° C
- Pressaure: Upto 20 bar
Applications:
- Water, Fire-fighting
- Fan pump, stock feed, stock circulation, centri-cleaner application in pulp & paper mills
- Storm water, irrigation
- Industries transfer works
Design Features:
- Axial split two stage
- Single suction, radial
- Vibration free
- Gland packing/Mech seal
TPS+H SERIES -
MEDIUM CONSISTENCY PUMP
Operating range:
- Capacity : Upto 500m3/hr
- Head : Upto 140 M
- Temperature: Upto 150 *C
- Pressure : Upto 22 Bar
Application:
- Handling Pulp & Paper stock up to 8% -12% Consistency
- Available within built (or) External vacuum pump
Design Features:
- Open impeller with Fluidizer
- Centrifugal & Single stage
- End suction & Top/Horizontal Discharge
- Vibration free casing Mounting to the base frame
SPS+T SERIES -
HEAVY DUTY PULP & PAPER STOCK PUMP
Operating Range:
- Capacity: Upto 2000m3/hr
- Head: Upto 80 M
- Temperature: Upto 140*C
- Pressure: Upto 22 Bar
- Pump Size : DN 32 to 400 mm
Applications:
- Handling pulp & paper stocks upto 7% Consistency
- All liquor applications suitable
- Suitable for high capacity requirements of acids, alkaline, corrosive slurries ,heavily contaminated liquids , raw sewage & Sludge
Design Features:
- Wide passage in impeller suction zone
- Non- clogging design
- Open impeller with renewable front wear plate & closed impeller with wear ring
- Simple external adjustment to maintain constant clearance between impeller & wear plate
- Gland packed /mechanical seal / dynamic seal tapper roller bearing to talk care of radial thrust loads
TCH+N SERIES -
CHEMICAL PROCESS PUMPS
Operating range:
- Capacity: Upto 700 m3/hr
- Head: Upto 180 M
- Temperature: Upto 200*C
- Pressure: Upto 26 Bar
- Pump size : DN 25mm to 200mm
Application :
- For low Consistency Pulp & stock
- Green liquor, black liquor, caustic and corrosive slurry
- For lime mud slurry, extraction Alkalies , Acids, NaOH ,China clay, Fitrate
- For hypo, spent wash, starch etc.
Design Feature:
- Confirming to ANSI B73.1
- Semi open impeller with Balancing Holes
- End Suction & Top Center line discharge
- Simple external adjustment for impeller wear
- Gland packing / Mechanical seal / dynamic seal
CPC SERIES -
CHEMICAL PROCESS PUMP
Operating Range :
- Capacity :Upto 750M3/hr
- Head : Upto 150 M
- Temperature : Upto 200*C
- Pressure : Upto 22 Bar
- Pump Size :DN 32 to 200 mm
Application:
- For Pulp with less than 1.5% Consistency,
- Fan pump De- inking process liquors , clarified water , back water , white water ,
- For Dewatering, etc.
- For the use of Chemicals , Acids, Alkalis, Dyes, hydrocarbons etc.,
- For DM Water, Hot water, Condensates,
Design Feature:
- Confirm to DIN 24256
- Closed impellers with balancing holes
- Wear ring to maintain the clearance
- Back pull out design
- Gland packing / mechanical seal / only 4 bearing frames to cover 32 models
WP SERIES -
WATER PUMPS
Operating Range:
- Capacities : Up to 550m³ /hr
- Head : Up to 100 m
- Temperatures : Up to 120° C
- Pressure : Up to 16 bar
- Pump Size : DN 32 to 150 mm
Application:
- De-inking water , soft water,
- Centri Clearner Etc,
- Clarified water, back water, white water
- Booster Service
Design Features:
- Conforming to DIN 24255
- Back pull out design
- Gland packed / Mechanical sealed
- Closed impeller Design with wear ring, for close clearance
MD SERIES -
MULTI - STAGE PUMPS
Operating Range:
- Capacity : Up to 350m³ /hr
- Head : Up to 600 m
- Temperature : Up to 120° C
- Pressure : Up to 90 bar
- Pump Size : DN 40 to 150 mm
Applications:
- High pressure application in pulp & paper mills
- Main & auxiliary condensate extraction
- General water
- Dewatering & Descaling
Design Features:
- Multi stage with single suction -closed impeller
- Axial thrust compensated by Balancing Drum or Disc
MF SERIES -
MIXED FLOW PUMPS
Operating Range:
- Capacity: Up to 3000m³ /hr
- Head: Up to 40 m
- Temperature: Up to 110° C
- Pressure: Up to 7.5 bar
- Pump Size: DN 200 to 450 mm
Applications:
- Stock feed
- Stock Circulation / pulp transfer/ Centric cleaner/clear liquid
- Turbid or slightly contaminated liquid
Design Features:
- Horizontal, Single stage
- End suction & discharge branch arranged tangentially upwards / Horizontal
- Open impeller construction
VG SERIES -
VERTICAL CANTILEVER PUMPS
Operating Range:
- Capacity : Up to 400m³ /hr
- Head : Up to 50m
- Temperature : Up to 120° C
- Pressure :Up to 22 bar
- Pump Size : DN 25 to 200 mm
Applications:
- Suitable where space economy matters
- Suitable for Acids, Alkalies & Slurries
- Waste water, sludge handling
Design Features:
- Vertical suspended / single shaft Design/ No intermediate Bush Bearing Support
- Simple Mounting & self-priming
- Up to 2mts Submersion Depth
- Can Be Extended Further with Suction Spool
VO SERIES -
VERTICAL SUMP PUMPS
Operating Range:
- Capacity : Up to 900m³ /hr
- Head : Up to 120 m
- Temperature : Up to 120° C
- Pressure : Up to 22 bar
- Pump Size : DN 25 to 300 mm
Applications:
- Suitable where space economy matters
- Suitable for Acids, Alkalies & Slurries
- Waste water, sludge Handling
- Sludge Handing
Design Features:
- Vertical Suspended with open / closed impellers
- With Intermediate Bush Bearing Support
- Simple mounting and self-priming
- Up to 10 m Submersion Depth
- Simple , Fast , External Impeller Adjustment
Chemical Process Pump (ECH+N)
Operating Range :
- Delivery Size: DN 25 to 200 mm
- Capacity: Up to 700m³ /hr
- Head: Up to 180 m
- Temperature: Up to 200° C
- Pressure: Up to 26 bar
Applications:
- Handles all chemical process requirements
- Acids, alkalies, corrosive slurries
- Suitable for all liquids with / without solids
- Green liquor, black liquor, Caustic Slurry, lime-mud slurry, extraction, Alkalies, Acids, NaOH, China clay, Filtrate, Hypo, Spent wash, starch etc. in pulp, paper mills & basic metal industries
Design Features:
- Conforming to ANSI B73.1
- Open impeller construction
- End suction / Top center line discharge
- Only 3 bearing beds to cover 32 models
- Gland packed / mechanical seal
- Simple external adjustment for impeller wear